REFERENCES

1.  Title 42 U.S.C. 2011, et. seq., "Atomic Energy Act of 1954," as amended,
    which establishes a program for Government control of the possession,
    use and production of atomic energy and special nuclear material,
    whether owned by the Government or others.

2.  Title 10 Code of Federal Regulations Parts 1 to 199, Nuclear Regulatory
    Commission Regulations, which contain the regulations applicable to
    Nuclear Regulatory Commission and "Agreement State" licensees involved
    in activities concerning nuclear materials not subject to DOE
    requirements.

3.  DOE 1270.2B, SAFEGUARDS AGREEMENT WITH THE INTERNATIONAL ATOMIC ENERGY
    AGENCY, of 6-23-92, which prescribes policies and responsibilities for
    compliance with the agreement, including the associated protocol,
    between the Federal Government and the International Atomic Energy
    Agency for the application of safeguards in the United States.

4.  DOE 1360.2B, UNCLASSIFIED COMPUTER SECURITY PROGRAM, of 5-18-92, which
    establishes requirements, policies, responsibilities, and procedures for
    developing and sustaining a DOE unclassified security program.

5.  DOE 5000.3B, OCCURRENCE REPORTING AND PROCESSING OF OPERATIONS
    INFORMATION, of 1-19-93, which establishes a DOE system for
    identification, categorization, notification, analysis, reporting,
    followup, and closeout of occurrence.

6.  DOE 5400.1, GENERAL ENVIRONMENTAL PROTECTION PROGRAM, of 11-9-88, which
    establishes the environmental protection program for DOE Operations.

7.  DOE 5480.1B, ENVIRONMENT, SAFETY, AND HEALTH PROGRAM FOR DEPARTMENT OF
    ENERGY OPERATIONS, of 9-23-86, which establishes the Department's
    environmental protection, safety, and health protection program.

8.  DOE 5480.18A, ACCREDITATION OF PERFORMANCE-BASED TRAINING FOR CATEGORY A
    REACTORS AND NUCLEAR FACILITIES, of 7-19-91, which establishes a
    performance based training process for reactor and nonreactor nuclear
    facilities in DOE.

9.  DOE 5480.20, PERSONNEL SELECTION, QUALIFICATION, TRAINING, AND STAFFING
    REQUIREMENTS AT DOE REACTOR AND NON-REACTOR NUCLEAR FACILITIES, of
    2-20-91, which establishes the selection, qualification, training, and
    staffing requirements for personnel involved in the operation,
    maintenance, and technical support of DOE-owned reactors and nonreactor
    nuclear facilities.

10. DOE 5484.1, ENVIRONMENTAL PROTECTION, SAFETY, AND HEALTH PROTECTION
    INFORMATION REPORTING REQUIREMENTS, of 2-24-81, which establishes the
    requirements and procedures for the investigation of occurrences having
    environmental protection, safety, or health protection significance for
    DOE operations.

11. DOE 5500.1B, EMERGENCY MANAGEMENT SYSTEM, of 4-30-91, which establishes
    overall policy and requirements for a system that will provide for
    development, coordination, and direction of Department planning,
    preparedness, and readiness assurance for response to operational,
    energy, and Continuity of Government emergencies involving DOE or
    requiring Departmental assistance.

12. DOE 5630.11B, SAFEGUARDS AND SECURITY PROGRAM, of 8-2-94, which
    establishes the policy and responsibilities for the DOE Safeguards and
    Security Program.

13. DOE 5630.13A, MASTER SAFEGUARDS AND SECURITY AGREEMENTS, of 6-8-92,
    which establishes Departmental policy, requirements, and authorities for
    the development of Master Safeguards and Security Agreements.

14. DOE 5630.14A, SAFEGUARDS AND SECURITY PROGRAM PLANNING, of 6-9-92, which
    establishes a standardized approach to protection program planning,
    prescribes DOE policy, objectives, responsibilities, and authorities for
    that planning process, and consolidates site and master plan
    requirements.

15. DOE 5630.15, SAFEGUARDS AND SECURITY TRAINING PROGRAM, of 8-21-92, which
    establishes procedures for standardizing and implementing the DOE
    safeguards and security training program for safeguards and security
    personnel, and prescribes the policy, responsibilities, and authority
    for that training program.

16. DOE 5630.16A, SAFEGUARDS AND SECURITY ACCEPTANCE AND VALIDATION TESTING
    PROGRAM, of 6-3-93, which establishes requirements for integrated
    performance testing of personnel, procedures, and equipment to
    demonstrate the adequacy and effectiveness of the safeguards and
    security performance requirements mandated under DOE directives.

17. DOE 5630.17, SAFEGUARDS AND SECURITY (S&S) STANDARDIZATION PROGRAM, of
    9-29-92, which provides policies, procedures, responsibilities, and
    authority for the Safeguards and Security Standardization Program to
    ensure the most effective and efficient use and procurement of
    safeguards and security equipment and systems.

18. DOE 5631.6A, PERSONNEL SECURITY ASSURANCE PROGRAM, of 9-15-92, which
    establishes policies, objectives, procedures, responsibilities, and
    authorities for a Personnel Security Assurance Program.

19. DOE 5632.1C, PROTECTION AND CONTROL OF SAFEGUARDS AND SECURITY
    INTERESTS, of 7-15-94, and DOE M 5632.1C-1, MANUAL FOR PROTECTION AND
    CONTROL OF SAFEGUARDS AND SECURITY INTERESTS, of 7-15-94, which
    establish Departmental policies and procedures related to the physical
    protection of DOE property and security interests.

20. DOE 5633.3B GUIDE OF IMPLEMENTATION INSTRUCTIONS FOR NUCLEAR MATERIALS
    MANAGEMENT AND SAFEGUARDS SYSTEM REPORTING AND DATA SUBMISSION, to be
    published concurrently with this Order, which details the data elements
    and procedures required to document and report nuclear materials
    transactions, material balances, and inventories to the Nuclear
    Materials Management and Safeguards System.

21. DOE 5634.1B, FACILITY APPROVAL, SECURITY SURVEYS, AND NUCLEAR MATERIALS
    SURVEYS, of 9-15-92, which establishes requirements for the conduct of
    onsite security or nuclear materials surveys of facilities with DOE
    safeguards and security interests.

22. DOE 5639.6A, CLASSIFIED AUTOMATED INFORMATION SYSTEM SECURITY PROGRAM,
    of 7-15-94, which establishes requirements, policies, and
    responsibilities for the development and implementation of a
    Departmental program to ensure the security of information stored in
    classified computer systems.

23. DOE 5700.6C, QUALITY ASSURANCE, of 8-21-91, which establishes quality
    assurance requirements for DOE.

24. DOE 5820.2A, RADIOACTIVE WASTE MANAGEMENT, of 9-26-88, which establishes
    polices, guidelines, and minimum requirements for managing radioactive
    and mixed waste.

25. DOE 6430.1A, GENERAL DESIGN CRITERIA, of 4-6-89, which provides subject
    criteria for use in the acquisition of Departmental facilities.

26. ANSI N15.19-89, "Nuclear Material Control - Volume Calibration
    Techniques" American National Standards Institute, Inc., 1430 Broadway,
    New York, NY 10018 (1989).

27. ANSI N15.36-83, "Nuclear Materials - Nondestructive Assay Measurement
    Control and Assurance," American National Standards Institute, Inc.,
    1430 Broadway, New York, NY 10018 (1983).

28. ANSI N15.41-84, "Nuclear Facilities - Derivation of Measurement Control
    Programs - General Requirements," American National Standards Institute,
    Inc., 1430 Broadway, New York, NY 10018 (1984).

29. ANSI N15.51-90, "Measurement Control Programs Nuclear Materials
    Analytical Chemistry Laboratory," American National Standards Institute,
    Inc., 1430 Broadway, New York, NY 10018 (1991).

30. ANSI N15.54-90, "Instrumentation - Radiometric Calorimeters Measurement
    Control Program," American National Standards Institute, Inc., 1430
    Broadway, New York, NY 10018 (1991).

31. ASTM Standard C993-92, "Guide for In-Plant Performance of Automatic
    Pedestrian SNM Monitors," American Society for Testing and Materials,
    1916 Race Street; Philadelphia, PA 19103 (7-93).

32. ASTM Standard C1112-93, "Guide for Application of Radiation Monitors to
    the Control and Physical Security of Special Nuclear Material," American
    Society for Testing and Materials, 1916 Race Street, Philadelphia, PA
    19103 (6-93).

33. ASTM Standard C1169-92, "Guide for Laboratory Evaluation of Automatic
    Pedestrian SNM Monitor Performance," American Society for Testing and
    Materials, 1916 Race Street, Philadelphia, PA 19103 (5-93).

34. ASTM Standard C1189-91, "Guide to Procedures for Calibrating Automatic
    Pedestrian SNM Monitor," American Society for Testing and Materials,
    1916 Race Street, Philadelphia, PA 19103 (7-91).

35. ASTM Standard C1236-93, "Guide for In-Plant Performances Evaluation of
    Automatic Vehicle SNM Monitors,"  American Society for Testing and
    Materials, 1916 Race Street, Philadelphia, PA 19103 (6-93).

36. ASTM Standard C1237-93, "Guide to In-Plant Performance Evaluation of
    Hand-Held SNM Monitors," American Society for Testing and Materials,
    1916 Race Street, Philadelphia, PA 19103 (6-93).

37. CG-SS-3, "Classification Guide for Safeguards and Security Information,"
    of August 1994, issued by the Director of Declassification, which
    provides original classification determinations for National Security
    Information concerning nuclear safeguards and various aspects of
    security and to provide guidance for derivatively classifying documents
    and materials containing such National Security Information, Restricted
    Data, and Formerly Restricted Data.

38. "DESIGN BASIS THREAT POLICY FOR THE DEPARTMENT OF ENERGY PROGRAMS AND
    FACILITIES (U)," of 9-7-94, issued by the Director of Security Affairs,
    which identifies and characterizes the range of potential generic
    adversary threats to the Department's nuclear programs and facilities
    which could adversely impact national security or the health and safety
    of Government and contractor employees, the public, or the environment.

39. DOE/NRC F 741/741A, NUCLEAR MATERIAL TRANSACTION REPORT, Office of
    Management and Budget Control Number 1910-1800, of 10-88, which is used
    for reporting values to Nuclear Materials Management and Safeguards
    System for external transfers of nuclear material.

40. "Guidance on Meeting DOE Order Requirements for Traceable Nondestructive
    Assay Measurements," Department of Energy, Office of Safeguards and
    Security (5-94).

41. "Guide for Implementation of DOE 5633.3A," of 2-93, issued by the
    Director of Security Affairs, which provides guidance in the
    understanding of materials control and accountability requirements
    contained therein.

42. "Guide for the Implementation of Safeguards and Security Directives,"
    Department of Energy, Office of Safeguards and Security, (11-26-93)
    which itemizes standards and criteria that emanate from Safeguards and
    Security Program directives.

43. "Guide to the Evaluation of Selected Materials Control and
    Accountability (MC&A) Detection Elements," U.S. Department of Energy,
    Office of Safeguards and Security (5-94).

44. "Measurement Control Guide," U.S. Department of Energy, Office of
    Safeguards and Security (3-93) which provides guidance to assist in the
    implementation of measurement control requirements.

45. "Metal Detector Guide," U.S. Department of Energy, Office of Safeguards
    and Security (2-22-90).

46. "Safeguards and Security Definitions Guide," U.S. Department of Energy,
    Office of Safeguards and Security (12-20-93) which provides standardized
    definitions of terms used in the Safeguards and Security Program.

47. "Safeguards Seal Reference Manual," (9-91) DOE, Office of Safeguards and
    Security, which provides guidance to nuclear facility personnel in
    selecting, procuring, and applying the proper seals for safeguarding
    nuclear material.

48. "Sample Master Safeguards and Security and Vulnerability Assessment
    (Volume III - MSSA Verification Process)," U.S. Department of Energy,
    Office of Safeguards and Security (1991).