JOINT COMPLIANCE AND INSPECTION COMMISSION
AGREEMENT NUMBER 7
RELATING TO THE TREATY BETWEEN
THE UNITED STATES OF AMERICA AND
THE UNION OF SOVIET SOCIALIST REPUBLICS ON
THE REDUCTION AND LIMITATION OF STRATEGIC OFFENSIVE ARMS
OF JULY 31, 1991
PROCEDURES FOR ADDITIONAL CONFIRMATION OF
THE DIMENSIONS OF FIRST STAGES OF SLBMS
The Governments of the Parties to the Treaty Between the United States
of America and the Union of Soviet Socialist Republics on the Reduction
and Limitation of Strategic Offensive Arms of July 31, 1991, hereinafter
referred to as the Treaty.
Acting in accordance with the Treaty,
Pursuant to subparagraph 5(d) of Annex Il to the Protocol on Inspections
and Continuous Monitoring Activities Relating to the Treaty, hereinafter
referred to as the Inspection Protocol,
Have agreed as follows:
Article One
The penultimate sentence of subparagraph 5(d) of Annex 11 to the Inspection
Protocol shall be superseded by the following provision:
"Procedures for such additional confirmation of the dimensions of the
first stages of SLBMs are provided for in Annex 13 to this Protocol,
unless otherwise agreed within the framework of the Joint Compliance
and Inspection Commission."
Article Two
The following provisions shall constitute Annex 13 to the Inspection
Protocol:
"ANNEX 13
PROCEDURES FOR ADDITIONAL CONFIRMATION OF THE DIMENSIONS OF FIRST
STAGES OF SLBMS
I. Procedures for Conducting Exhibitions
1. Pursuant to subparagraph 5(d) of Annex 11 to this Protocol. the
Russian Federation, hereinafter referred to in this Annex as the exhibiting
Party, shall conduct exhibitions of SLBMs of the types designated by
the Republic of Belarus, the Republic of Kazakhstan, the Russian Federation.
and Ukraine as RSM-40, RSM-50, RSM-52, and RSM-54, which are known to
the United States of America as SS-N-8, SS-N-18, SS-N-20, and SS-N-23,
respectively, for the purpose of additional confirmation of the dimensions
of the first stages of such SLBMs. The exhibition of an SLBM of each
such type:
(a) shall be considered to be a technical characteristics exhibition
pursuant to paragraph 11 of Article XI of the Treaty;
(b) shall be conducted subject to the provisions of this Protocol,
including paragraph 15 of Section III; paragraphs 8 and 9 of Section
V; paragraphs 15, 19, and 28 of Section VI; and paragraphs 4, 5, and
7 of Section XIV; and using any of the equipment specified in Section
III of Annex 8 to this Protocol; and
(c) shall be conducted during the first elimination of an SLBM of
each such type.
2. The exhibiting Party shall provide to the United States of America,
hereinafter referred to as the inspecting Party, a notification through
the Nuclear Risk Reduction Center no less than 30 days in advance of
each exhibition conducted in accordance with this Annex. Such notification
shall include: the type of SLBM to be exhibited, the location at which
such exhibition will take place, and the date of such exhibition.
3. The exhibiting Party shall have the right, at its discretion, to
either exhibit an SLBM and, simultaneously, a separate first stage of
an SLBM of the same type, or to exhibit sequentially an SLBM and then
its separated first stage. The SLBM being exhibited for the purpose
of additional confirmation of the dimensions of the first stage of an
SLBM of that type shall be an SLBM on which the exhibiting Party shall
have the right to carry out, before the exhibition, some of the procedures
for the elimination of an SLBM, to include removing some assemblies
and elements of the SLBM. For sequential exhibitions of the SLBM and
its first stage, the exhibiting Party shall separate the first stage
from the rest of the exhibited SLBM, subject to the provisions of Section
II of this Annex.
4. The inspecting Party shall have the right to confirm by external
viewing and by measurement of the dimensions of the SLBM being exhibited
that it is an SLBM of the declared type. If inspectors are unable to
determine the type of SLBM, representatives of the exhibiting Party
shall take steps to resolve the problem. Such steps shall include the
opportunity for the inspecting Party to measure those removed assemblies
and elements of the SLBM that contribute to the "Length of Assembled
Missile Without Front Section" for the type of SLBM being exhibited,
specified in Annex F to the Memorandum of Understanding. Upon completion
of such viewing and such measurements, the SLBM being exhibited shall
not be subject to further inspection.
5. The inspecting Party shall have the right to confirm the length
and diameter of the exhibited separate first stage of the SLBM, or first
stage of the SLBM separated during the exhibition, by measurement of
its dimensions. Such measurements shall be made in accordance with the
procedures provided for in paragraph 7 of Section XIV of this Protocol.
6. A member of the in-country escort, at the request of the inspectors,
shall photograph the exhibited separate or separated first stage of
the SLBM, in order to obtain three photographs of that stage that meet
the requirements of paragraph 10 of Annex J to the Memorandum of Understanding.
Such photographs shall be produced using a camera system of the exhibiting
Party. If an ambiguous situation arises, a member of the in-country
escort, at the request of the inspectors, shall take photographs using
the camera system of the inspecting Party, subject to the provisions
of paragraphs 18 and 27 of Section VI of, and Subsection B of Section
VI of Annex 8 to, this Protocol.
7. The exhibiting Party shall provide the inspection team with one
photograph of the first stage of the exhibited SLBM. Such photograph
shall meet the requirements of the agreement between the Government
of the United States of America and the Government of the Union of Soviet
Socialist Republics concluded on July 31, 1991, through the exchange
of letters on the provision of photographs of items subject to the Treaty.
8. Pursuant to subparagraph 5(d) of Annex 11 to this Protocol, during
the exhibition of the first stage of the SS-N-20 SLBM provided for in
this Annex, the inspecting Party shall also have the right to confirm
the diameter of the third stage of the SS-N-20 SLBM. A member of the
in-country escort, at the request of the inspectors, shall photograph
the third stage of the SS-N-20 SLBM in order to obtain three photographs
of that stage that meet the requirements of paragraph 10 of Annex J
to the Memorandum of Understanding. Such photographs shall be produced
using a camera system of the exhibiting Party. If an ambiguous situation
arises, a member of the in-country escort, at the request of the inspectors,
shall take photographs using the camera system of the inspecting Party,
subject to the provisions of paragraphs 15 and 27 of Section VI of,
and Subsection B of Section VI of Annex 8 to, this Protocol.
II. Procedures for Separating an SLBM First Stage from the SLBM Being
Exhibited
l. After the inspectors have confirmed the type of an SLBM pursuant
to paragraph 4 of Section I of this Annex, the exhibiting Party shall
have the right to separate, outside the field of view of inspectors,
the first stage from the rest of the SLBM being exhibited at the location
where the first stage separates from an SLBM during its flight, by mechanical
severing of the missile's airframe by pyrotechnic device of the missile,
provided that the process of separation is carried out in such a way
as to permit inspectors to ascertain that the first stage, the dimensions
of which they will confirm, belongs to the SLBM being exhibited, the
type of which they had previously confirmed.
2. Before the first stage is separated from the rest of the SLBM being
exhibited, inspectors shall have the right to view the room or area
in which the first stage will be separated, to ascertain that the room
or area does not contain another first stage of an SLBM of that type.
3. During the entire process of first stage separation, the inspectors
shall have the right to observe all exits of the room or area where
the process of separating the first stage from the SLBM is carried out."
Article Three
The number "1" shall be superscripted at the end of the title of Annex
13. The corresponding footnote shall read:
"This Annex is included in this Protocol pursuant to Joint Compliance
and Inspection Commission Agreement Number 7 of April 14, 1993."
Article Four
l. This Agreement shall enter into force on the date when the United
States of America, the Republic of Belarus, the Republic of Kazakhstan,
the Russian Federation, and Ukraine have consented to be bound by this
Agreement, or on the date of entry into force of the Treaty, whichever
is later, and shall remain in force as long as the Treaty remains in
force.
2. Signature of this Agreement for the Government of a Party shall
express the consent of that Party to be bound by this Agreement. The
consent of the Republic of Belarus, the Republic of Kazakhstan, and
Ukraine to be bound by this Agreement shall be expressed by their Governments
in accordance with paragraph 6 of Annex 1 to the Protocol on the Joint
Compliance and Inspection Commission Relating to the Treaty.
IN WITNESS WHEREOF the undersigned, being duly authorized by their
respective Governments, have signed this Agreement.
DONE at Geneva on April 14, 1993, in five copies, each in the English
and Russian languages, both texts being equally authentic.
FOR THE GOVERNMENT OF THE UNITED STATES OF AMERICA:
Steven Steiner
FOR THE GOVERNMENT OF THE RUSSIAN FEDERATION:
Gennadiy Shabannikov
|